Pb mandrakelinux 10.0 et Dongle DW-B-200 d'Inventel Cegetel

Bonjour,

J'ai un adaptateur wifi 802.11b sur mon portable Sony vaio sous Madrakelinux 10.0 Powerpack. J'ai lu les nombreuses indications déjà données dans des forums, mais, dans mon cas, après avoir cliqué sur nouvelle connexion, connexion sans fil, je dois choisir manuellement un pilote, et quand je choisis at76c503 et que j'ai cliqué sur détection automatique, il revient au choix du pilote comme s'il ne s'était rien passé. Je ne peux donc rien configurer, puisqu'il semble que mon adaptateur soit non reconnu par Mandrake.

J'ai tapé (avec le dongle branché lors du demarrage) lsusb -v et voici se qu'il m'ecris :

Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.3-7mdk uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:10.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 2
bInterval 255
Language IDs: (length=4)
0409 English(US)

J'ai tapé aussi la commande iwconfig voici se qu'il m'affiche:

lo no wireless extensions.

eth0 no wireless extensions.

sit0 no wireless extensions.

Avec la commande lsusb voici ce qui s'affiche
Bus 001 Device 001: ID 0000:0000

et avec la commande dmesg:

Linux version 2.6.3-7mdk (nplanel@n3.mandrakesoft.com) (gcc version 3.3.2 (Mandrake Linux 10.0 3.3.2-6mdk)) #1 Wed Mar 17 15:56:42 CET 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
BIOS-e820: 000000001fef0000 - 000000001fefc000 (ACPI data)
BIOS-e820: 000000001fefc000 - 000000001ff00000 (ACPI NVS)
BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
510MB LOWMEM available.
On node 0 totalpages: 130800
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126704 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI present.
Sony Vaio laptop detected.
ACPI: RSDP (v000 PTLTD ) @ 0x000f6890
ACPI: RSDT (v001 SONY K5 0x06040000 LTP 0x00000000) @ 0x1fef76bf
ACPI: FADT (v001 SONY K5 0x06040000 PTL_ 0x000f4240) @ 0x1fefbdff
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1fefbe73
ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x1fefbe9b
ACPI: DSDT (v001 SONY X0 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x8008
Built 1 zonelists
Kernel command line: BOOT_IMAGE=linux ro root=305 devfs=mount acpi=ht resume=/dev/hda6 splash=silent
bootsplash: silent mode.
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1800.978 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Memory: 513792k/523200k available (1816k kernel code, 8632k reserved, 849k data, 272k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3563.52 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 161k freed
CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD mobile AMD Athlon(tm) XP-M 2400+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1799.0755 MHz.
..... host bus clock speed is 266.0630 MHz.
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd944, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040211
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Disabled
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/3177] at 0000:00:11.0
PCI: IRQ 0 for device 0000:00:0e.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: IRQ 0 for device 0000:00:0e.1 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 9 for device 0000:00:0e.1
PCI: Sharing IRQ 9 with 0000:00:0c.0
PCI: IRQ 0 for device 0000:00:0e.2 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 11 for device 0000:00:0e.2
PCI: Sharing IRQ 11 with 0000:00:11.5
PCI: Sharing IRQ 11 with 0000:00:11.6
PCI: IRQ 0 for device 0000:00:11.1 doesn't match PIRQ mask - try pci=usepirqmask
vesafb: framebuffer at 0xf4000000, mapped to 0xe0800000, size 16384k
vesafb: mode is 800x600x16, linelength=1600, pages=15
vesafb: protected mode interface info at c000:f630
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
ikconfig 0.7 with /proc/config*
VFS: Disk quotas dquot_6.5.1
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Initializing Cryptographic API
PCI: Via IRQ fixup for 0000:00:11.6, from 255 to 11
isapnp: Scanning for PnP cards...
spurious 8259A interrupt: IRQ7.
isapnp: No Plug & Play device found
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 59572 bytes, v3).
Console: switching to colour frame buffer device 80x29
pty: 1024 Unix98 ptys configured
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
PCI: IRQ 0 for device 0000:00:11.1 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Assigned IRQ 5 for device 0000:00:11.1
PCI: Sharing IRQ 5 with 0000:00:0e.0
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdcMA, hddio
hda: FUJITSU MHS2040AT D, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: QSI CD-RW/DVD-ROM SBW-241, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 >
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
EISA: Probing bus 0 at eisa0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
BIOS EDD facility v0.13 2004-Mar-09, 1 devices found
Please report your BIOS at http://linux.dell.com/edd/results.html
Resume Machine: resuming from /dev/hda6
Resuming from device hda6
Resume Machine: This is normal swap space
PM: Reading pmdisk image.
PM: Resume from disk failed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 272k freed
Real Time Clock Driver v1.12
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
PCI: Found IRQ 9 for device 0000:00:10.0
uhci_hcd 0000:00:10.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:10.0 to 64
uhci_hcd 0000:00:10.0: irq 9, io base 00001020
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: No IRQ known for interrupt pin B of device 0000:00:10.1. Please try using pci=biosirq.
drivers/usb/core/hcd-pci.c: Found HC with no IRQ. Check BIOS/PCI 0000:00:10.1 setup!
PCI: No IRQ known for interrupt pin C of device 0000:00:10.2. Please try using pci=biosirq.
drivers/usb/core/hcd-pci.c: Found HC with no IRQ. Check BIOS/PCI 0000:00:10.2 setup!
PCI: Enabling device 0000:00:10.3 (0010 -> 0012)
PCI: No IRQ known for interrupt pin D of device 0000:00:10.3. Please try using pci=biosirq.
drivers/usb/core/hcd-pci.c: Found HC with no IRQ. Check BIOS/PCI 0000:00:10.3 setup!
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
EXT3 FS on hda5, internal journal
Adding 530104k swap on /dev/hda6. Priority:-1 extents:1
nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-5336 Wed Jan 14 18:29:26 PST 2004
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA KT266/KY266x/KT333 chipset
agpgart: Maximum main memory to use for agp memory: 438M
agpgart: AGP aperture is 128M @ 0xe8000000
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Supermount version 2.0.4 for kernel 2.6
NTFS driver 2.1.6 [Flags: R/O MODULE].
NTFS volume version 3.1.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ohci1394: $Rev: 1097 $ Ben Collins <bcollins@debian.org>
PCI: Enabling device 0000:00:0e.2 (0000 -> 0002)
PCI: Found IRQ 11 for device 0000:00:0e.2
PCI: Sharing IRQ 11 with 0000:00:11.5
PCI: Sharing IRQ 11 with 0000:00:11.6
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[e0000800-e0000fff] Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00] GUID[08004603017658f2]
8139too Fast Ethernet driver 0.9.27
PCI: Enabling device 0000:00:0c.0 (0000 -> 0003)
PCI: Found IRQ 9 for device 0000:00:0c.0
PCI: Sharing IRQ 9 with 0000:00:0e.1
PCI: Setting latency timer of device 0000:00:0c.0 to 64
eth0: RealTek RTL8139 at 0xe19fa000, 08:00:46:b0:23:40, IRQ 9
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4087 buckets, 32696 max) - 300 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4087 buckets, 32696 max) - 300 bytes per conntrack
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
PCI: IRQ 5 for device 0000:00:0e.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 5 for device 0000:00:0e.0
PCI: Sharing IRQ 5 with 0000:00:11.1
Yenta: CardBus bridge found at 0000:00:0e.0 [104d]
Yenta: ISA IRQ mask 0x0498, PCI irq 5
Socket status: 30000006
PCI: Found IRQ 9 for device 0000:00:0e.1
PCI: Sharing IRQ 9 with 0000:00:0c.0
Yenta: CardBus bridge found at 0000:00:0e.1 [104d]
Yenta: ISA IRQ mask 0x0498, PCI irq 9
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
inserting floppy driver for 2.6.3-7mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
drivers/usb/core/usb.c: registered new driver hiddev
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
NET: Registered protocol family 17
via82xx: Assuming DXS channels with 48k fixed sample rate.
Please try dxs_support=1 or dxs_support=4 option
and report if it works on your machine.
PCI: Found IRQ 11 for device 0000:00:11.5
PCI: Sharing IRQ 11 with 0000:00:0e.2
PCI: Sharing IRQ 11 with 0000:00:11.6
PCI: Setting latency timer of device 0000:00:11.5 to 64
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
NET: Registered protocol family 10
Disabled Privacy Extensions on device c035fe60(lo)
IPv6 over IPv4 tunneling driver
parport0: PC-style at 0x378 [PCSPP]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (polling).
lp0: console ready
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 9341 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 9341 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 9341 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 9341 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 9341 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 9341 bytes, v3).
bootsplash: status on console 5 changed to on
SCSI subsystem initialized
st: Version 20040122, fixed bufsize 32768, s/g segs 256

Voici ce qu'il m'affiche lorsque je le branche apres le demarre de linux avec la commande dsmeg:

Linux version 2.6.3-7mdk (nplanel@n3.mandrakesoft.com) (gcc version 3.3.2 (Mandrake Linux 10.0 3.3.2-6mdk)) #1 Wed Mar 17 15:56:42 CET 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
BIOS-e820: 000000001fef0000 - 000000001fefc000 (ACPI data)
BIOS-e820: 000000001fefc000 - 000000001ff00000 (ACPI NVS)
BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
510MB LOWMEM available.
On node 0 totalpages: 130800
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126704 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI present.
Sony Vaio laptop detected.
ACPI: RSDP (v000 PTLTD ) @ 0x000f6890
ACPI: RSDT (v001 SONY K5 0x06040000 LTP 0x00000000) @ 0x1fef76bf
ACPI: FADT (v001 SONY K5 0x06040000 PTL_ 0x000f4240) @ 0x1fefbdff
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1fefbe73
ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x1fefbe9b
ACPI: DSDT (v001 SONY X0 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x8008
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=linux ro root=305 devfs=mount acpi=ht resume=/dev/hda6 splash=silent
bootsplash: silent mode.
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1800.945 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Memory: 513792k/523200k available (1816k kernel code, 8632k reserved, 849k data, 272k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3563.52 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 161k freed
CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD mobile AMD Athlon(tm) XP-M 2400+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1799.0764 MHz.
..... host bus clock speed is 266.0631 MHz.
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd944, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040211
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Disabled
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/3177] at 0000:00:11.0
PCI: IRQ 0 for device 0000:00:0e.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: IRQ 0 for device 0000:00:0e.1 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 9 for device 0000:00:0e.1
PCI: Sharing IRQ 9 with 0000:00:0c.0
PCI: IRQ 0 for device 0000:00:0e.2 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 11 for device 0000:00:0e.2
PCI: Sharing IRQ 11 with 0000:00:11.5
PCI: Sharing IRQ 11 with 0000:00:11.6
PCI: IRQ 0 for device 0000:00:11.1 doesn't match PIRQ mask - try pci=usepirqmask
vesafb: framebuffer at 0xf4000000, mapped to 0xe0800000, size 16384k
vesafb: mode is 800x600x16, linelength=1600, pages=15
vesafb: protected mode interface info at c000:f630

vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
ikconfig 0.7 with /proc/config*
VFS: Disk quotas dquot_6.5.1
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Initializing Cryptographic API
PCI: Via IRQ fixup for 0000:00:11.6, from 255 to 11
isapnp: Scanning for PnP cards...
spurious 8259A interrupt: IRQ7.
isapnp: No Plug & Play device found
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 59572 bytes, v3).
Console: switching to colour frame buffer device 80x29
pty: 1024 Unix98 ptys configured
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
PCI: IRQ 0 for device 0000:00:11.1 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Assigned IRQ 5 for device 0000:00:11.1
PCI: Sharing IRQ 5 with 0000:00:0e.0
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdcMA, hddio
hda: FUJITSU MHS2040AT D, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: QSI CD-RW/DVD-ROM SBW-241, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 >
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
EISA: Probing bus 0 at eisa0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
BIOS EDD facility v0.13 2004-Mar-09, 1 devices found
Please report your BIOS at http://linux.dell.com/edd/results.html
Resume Machine: resuming from /dev/hda6
Resuming from device hda6
Resume Machine: This is normal swap space
PM: Reading pmdisk image.
PM: Resume from disk failed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 272k freed
Real Time Clock Driver v1.12
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
PCI: Found IRQ 9 for device 0000:00:10.0
uhci_hcd 0000:00:10.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:10.0 to 64
uhci_hcd 0000:00:10.0: irq 9, io base 00001020
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: No IRQ known for interrupt pin B of device 0000:00:10.1. Please try using pci=biosirq.
drivers/usb/core/hcd-pci.c: Found HC with no IRQ. Check BIOS/PCI 0000:00:10.1 setup!
PCI: No IRQ known for interrupt pin C of device 0000:00:10.2. Please try using pci=biosirq.
drivers/usb/core/hcd-pci.c: Found HC with no IRQ. Check BIOS/PCI 0000:00:10.2 setup!
PCI: Enabling device 0000:00:10.3 (0010 -> 0012)
PCI: No IRQ known for interrupt pin D of device 0000:00:10.3. Please try using pci=biosirq.
drivers/usb/core/hcd-pci.c: Found HC with no IRQ. Check BIOS/PCI 0000:00:10.3 setup!
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
EXT3 FS on hda5, internal journal
Adding 530104k swap on /dev/hda6. Priority:-1 extents:1
nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-5336 Wed Jan 14 18:29:26 PST 2004
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA KT266/KY266x/KT333 chipset
agpgart: Maximum main memory to use for agp memory: 438M
agpgart: AGP aperture is 128M @ 0xe8000000
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Supermount version 2.0.4 for kernel 2.6
NTFS driver 2.1.6 [Flags: R/O MODULE].
NTFS volume version 3.1.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ohci1394: $Rev: 1097 $ Ben Collins <bcollins@debian.org>
PCI: Enabling device 0000:00:0e.2 (0000 -> 0002)
PCI: Found IRQ 11 for device 0000:00:0e.2
PCI: Sharing IRQ 11 with 0000:00:11.5
PCI: Sharing IRQ 11 with 0000:00:11.6
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[e0000800-e0000fff] Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00] GUID[08004603017658f2]
8139too Fast Ethernet driver 0.9.27
PCI: Enabling device 0000:00:0c.0 (0000 -> 0003)
PCI: Found IRQ 9 for device 0000:00:0c.0
PCI: Sharing IRQ 9 with 0000:00:0e.1
PCI: Setting latency timer of device 0000:00:0c.0 to 64
eth0: RealTek RTL8139 at 0xe19fa000, 08:00:46:b0:23:40, IRQ 9
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4087 buckets, 32696 max) - 300 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4087 buckets, 32696 max) - 300 bytes per conntrack
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
PCI: IRQ 5 for device 0000:00:0e.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 5 for device 0000:00:0e.0
PCI: Sharing IRQ 5 with 0000:00:11.1
Yenta: CardBus bridge found at 0000:00:0e.0 [104d]
Yenta: ISA IRQ mask 0x0498, PCI irq 5
Socket status: 30000006
PCI: Found IRQ 9 for device 0000:00:0e.1
PCI: Sharing IRQ 9 with 0000:00:0c.0
Yenta: CardBus bridge found at 0000:00:0e.1 [104d]
Yenta: ISA IRQ mask 0x0498, PCI irq 9
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
inserting floppy driver for 2.6.3-7mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
drivers/usb/core/usb.c: registered new driver hiddev
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
NET: Registered protocol family 17
via82xx: Assuming DXS channels with 48k fixed sample rate.
Please try dxs_support=1 or dxs_support=4 option
and report if it works on your machine.
PCI: Found IRQ 11 for device 0000:00:11.5
PCI: Sharing IRQ 11 with 0000:00:0e.2
PCI: Sharing IRQ 11 with 0000:00:11.6
PCI: Setting latency timer of device 0000:00:11.5 to 64
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
NET: Registered protocol family 10
Disabled Privacy Extensions on device c035fe60(lo)
IPv6 over IPv4 tunneling driver
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
parport0: PC-style at 0x378 [PCSPP]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (polling).
lp0: console ready
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 9341 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 9341 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 9341 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 9341 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 9341 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 9341 bytes, v3).
bootsplash: status on console 5 changed to on
SCSI subsystem initialized
st: Version 20040122, fixed bufsize 32768, s/g segs 256

Avec la commande lsusb voici ce qui s'affiche
Bus 001 Device 001: ID 0000:0000

PS: j'ai deja posé c'est question dans un autre forum et il ne peuvent pas m'aider et une personne m'as dit "C'est bien un pb de support usb : le systeme ne voit que la racine ( ID 0000:0000 ) et pas les devices
il faut que tu ailles voir sur les forums dediés a la Mandrake pour la partie usb
désolé de ne pas avoir de solution a fournir"

Pouvais vous m'aider??:-(
Merci