Prob. Graveur LG GSA-H62L

Le graveur ne peut plus graver aucun DVD±R, DVD-RW, CD-R. Il lit très bien, capable de lire des films, de decrypter des DVD-Vidéo, CD. Lors d’une gravure, il commence, fait 1 à 3% et gèle. Le disque continue à tourner, la lumière continue à flasher mais ne grave plus. Le pourcentage ne monte plus et je dois redémarrer l’ordi. Même en simulation il fait le même trouble. J’ai essayé de changer la mémoire de l’ordi, d’enlever toutes les cartes, de débrancher tout les périphériques extérieurs (pour conflit IRQ), de remettre à jour les drivers NVidia et SATA, d’utiliser les drivers de Windows plutôt que ceux d’NVidia ou Silicone. J’ai aussi essayé de le changer de port SATA. J’ai remonté Windows sans aucun Soft sauf ceux nécessaire pour graver. J’ai débranché le disque dur SATA pour le laisser seul. Il n’y a pas de nouveau Firmware sur le site de LG. Je crois avoir fait le tour de tout problème extérieur au graveur autant Software que Hardware. La seule solution qui reste c’est que le graveur est en trouble. Je n’ai pas essayé le Lightscribe depuis un bout, n’ayant pas de disque compatible Lightscribe en main. J’ai essayé plusieurs soft différents, Nero, Clone DVD, DVDFab, DVD Shrink, ImgBurn, toujours le même trouble.

Je joins aussi une partie d'un log d’erreur de Nero 8.0.3.0.

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.0.3.0
Internal Version: 8, 0, 3, 0

Recorder: <HL-DT-ST DVDRAM GSA-H62L>Version: DL00 - HA 1 TA 0 - 8.0.3.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST DVDRAM GSA-H62L >Version: DL00 - HA 1 TA 0 - 8.0.3.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : PLEXTOR CD-R PX-W1210A atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 5T040H4 atapi Port 1 ID 0 DMA: On
DiskPeripheral : WDC WD1600JS-00MHB0 02.0 si3112r Port 2 ID 0 DMA: Off
CdRomPeripheral : HL-DT-STDVDRAM GSA-H62L DL00 si3112r Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-H62L F: CdRom0
PLEXTOR CD-R PX-W1210A E: CdRom1
=======================

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 569MB (582724kB)
Memory in use : 44 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.12.2007
Compilation ISO
18:45:02 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

18:45:02 #2 Text 0 File Isodoc.cpp, Line 6668
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

18:45:02 #3 ISO9660GEN -11 File Geniso.cpp, Line 3345
First writeable address = 0 (0x00000000)

18:45:02 #4 Text 0 File Burncd.cpp, Line 3520
Turn on Disc-At-Once, using DVD media

18:45:03 #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1073887 (238:38.37, 2097MB)

18:45:03 #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

18:45:03 #7 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVDRAM GSA-H62L, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

18:45:03 #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18:45:03 #9 Text 0 File ThreadedTransferInterface.cpp, Line 795
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1073888 (1073888) = #1073888/238:38.38
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1073888 blocks [F: HL-DT-ST DVDRAM GSA-H62L]
--------------------------------------------------------------

18:45:03 #10 Text 0 File ThreadedTransferInterface.cpp, Line 997
Prepare [F: HL-DT-ST DVDRAM GSA-H62L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2199322624, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1073888 | 0 | 0x00
1073888 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

18:45:03 #11 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

18:45:03 #12 Text 0 File Burncd.cpp, Line 4306
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

18:45:03 #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

18:45:03 #14 Text 0 File Burncd.cpp, Line 4425
Cache writing successful.

18:45:03 #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

18:45:03 #16 Phase 32 File dlgbrnst.cpp, Line 1762
Simulation started at 18x (24 930 Ko/s)

18:45:03 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

18:45:03 #18 Text 0 File DVDR.cpp, Line 3227
Recording mode: Sequential Recording Mode

18:45:03 #19 Text 0 File DVDR.cpp, Line 3383
Start write address at LBA 0
DVD high compatibility mode: Yes

18:45:03 #20 Text 0 File Cdrdrv.cpp, Line 9918
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

18:45:03 #21 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

18:45:04 #22 Text 0 File Cdrdrv.cpp, Line 1342
18:45:04.593 - 㩆䠠ⵌ呄匭⁔噄剄䵁䜠䅓䠭㈶L : Queue again later

20:09:01 #23 SPTI -500 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 01 AC 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x0c5ad940: Len x10000
0x62 99 A4 50 F6 D3 EC B1 10 7F CA 25 EB 49 05 C9
0x62 08 25 E0 7B DE 03 95 4F F4 CA 30 9F F1 52 A6
0xEF DB 31 5E 42 38 8B FE 27 7F 87 6A 6A D9 C2 06

20:09:09 #24 SPTI -1061 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x8D
CDB Data: 0x2A 00 00 01 AC 00 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 32 52 04 0C 44 8D
Buffer x0863b280: Len x10000
0x62 99 A4 50 F6 D3 EC B1 10 7F CA 25 EB 49 05 C9
0x62 08 25 E0 7B DE 03 95 4F F4 CA 30 9F F1 52 A6
0xEF DB 31 5E 42 38 8B FE 27 7F 87 6A 6A D9 C2 06

20:09:09 #25 CDR -1061 File Writer.cpp, Line 312
Internal target failure
F: HL-DT-ST DVDRAM GSA-H62L

20:09:09 #26 Text 0 File DVDR.cpp, Line 3785
EndDAO: Last written address was 109567 (1ABFFh)

20:09:09 #27 CDR -1061 File WriterStatus.cpp, Line 162
Internal target failure
F: HL-DT-ST DVDRAM GSA-H62L

20:09:09 #28 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

20:09:09 #29 Phase 34 File dlgbrnst.cpp, Line 1762
Simulation failed at 18x (24 930 Ko/s)

20:09:10 #30 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

20:09:16 #31 Text 0 File Cdrdrv.cpp, Line 11159
DriveLocker: UnLockVolume completed

20:09:16 #32 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)