Problème DHCP avec D-LINK WBR-2310

Salut,

Bon ça règlera pas le problème du routeur, mais tu peux mettre en ip fixe

Bonjour,

En relisant le forum de D-LINK j'ai trouvé une solution :
En gros, il faut utiliser le firmware du DI-624 (si tu ouvres ton routeur, c'est le même hardware, seule la boite extérieure est différente). L'interface n'est pas identique mais on y offre les mêmes options mais disposées d'une autre façon.

Voici L'original en anglais : (il y a 7 pages de questions réponse pour ce problème de déconnection, je n'ai gardé que la partie intéressante)
http://forums.dlink.com/index.php?topic=1265.0
Hi all,

Instead of downloading the Russian firmware as suggested by XPhile, I tried downloading the firmware for the DI-624 from D-Link's website (http://support.dlink.com/products/view.asp?productid=DI-624_revD). I used firmware version 4.04 dated 6/13/2007. The interface does not look like that of the WBR-2310 like the Russian firmware, but it has all the same features and options. Some things are in different locations, but look around and you will find everything there (at least I found all the config options I needed).

The great news is that with this firmware you can select Super G without Turbo and pick your own wireless channel and still get 108Mbps! Also, the wireless is very stable. I have not seen any disconnects and download speeds are better than with the WBR-2310 firmware. And it does restart the modem properly after applying new settings. It does not have the 35 second clock the WBR-2310, but just wait for your wireless (or Ethernet connection) to reconnect after applying a new setting and then hit Continue. You can't change the admin or user login names (you must use 'admin' and 'user') but you can change their passwords. Also, once logged in you do not have to login again after applying each setting.

Hope this works for everyone.

-FUSCH