ok ok ^^
Edit : Voila ce que j'obtiens
igconfig
geek@cyberspace:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:18:F3:29:22:E2
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:17 Base address:0xc000
eth1 Link encap:Ethernet HWaddr 00:18:F3:3A:01:A9
inet6 addr: fe80::218:f3ff:fe3a:1a9/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:29 errors:0 dropped:25 overruns:0 frame:0
TX packets:1541 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7139 (6.9 KiB) TX bytes:77424 (75.6 KiB)
Interrupt:11
eth0:avah Link encap:Ethernet HWaddr 00:18:F3:29:22:E2
inet addr:169.254.7.108 Bcast:169.254.255.255 Mask:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
Interrupt:17 Base address:0xc000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:121 errors:0 dropped:0 overruns:0 frame:0
TX packets:121 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:9391 (9.1 KiB) TX bytes:9391 (9.1 KiB)
route
geek@cyberspace:~$ route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
link-local * 255.255.0.0 U 0 0 0 eth0
default * 0.0.0.0 U 1000 0 0 eth0
Par ailleurs j'ai remarqué un truc : en fait je ne suis visiblement pas connecter a ma livebox puisque j'ai essayé de m'y connecter pour voir si je pouvais la reconfigurer et je n'ai pas pu acceder à l'adresse (192.168.1.1)... Donc je comprend pas vraiment
![[:flobesst:9] [:flobesst:9]]()
Il me dit pourtant qu'il a trouvé un réseau et qu'il s'y est connecté non?
Merci de ton aide