Bonjour j'ai vu qu'on pouvait overcloker le processeur mais comment
Sinon voici la config:
-------------------------
CPU-Z version 1.47
-------------------------

Processors Map
------------------------------------------------------------------------------------

Number of processors 1
Number of threads 1

Processor 0
-- Core 0
-- Thread 0


Processors Information
------------------------------------------------------------------------------------

Processor 1 (ID = 0)
Number of cores 1 (max 1)
Number of threads 1 (max 1)
Name AMD Athlon XP
Codename Barton
Specification AMD Athlon(tm) XP 2500+
Package Socket A (462)
CPUID 6.A.0
Extended CPUID 7.A
Core Stepping
Technology 0.13 um
Core Speed 1830.0 MHz (11.0 x 166.4 MHz)
Rated Bus speed 332.7 MHz
Instructions sets MMX (+), 3DNow! (+), SSE
L1 Data cache 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 512 KBytes, 16-way set associative, 64-byte line size
FID/VID Control no
Features
K7 Thermal sensor yes


Thread dumps
------------------------------------------------------------------------------------

CPU Thread 0
APIC ID 0
Topology Processor ID 0, Core ID 0, Thread ID 0
Type 02001002h
Max CPUID level 00000001h
Max CPUID ext. level 80000008h

Function eax ebx ecx edx
0x00000000 0x00000001 0x68747541 0x444D4163 0x69746E65
0x00000001 0x000006A0 0x00000000 0x00000000 0x0383FBFF
0x80000000 0x80000008 0x68747541 0x444D4163 0x69746E65
0x80000001 0x000007A0 0x00000000 0x00000000 0xC1C3FBFF
0x80000002 0x20444D41 0x6C687441 0x74286E6F 0x5820296D
0x80000003 0x35322050 0x002B3030 0x00000000 0x00000000
0x80000004 0x00000000 0x00000000 0x00000000 0x00000000
0x80000005 0x0408FF08 0xFF20FF10 0x40020140 0x40020140
0x80000006 0x00000000 0x41004100 0x02008140 0x00000000
0x80000007 0x00000000 0x00000000 0x00000000 0x00000001
0x80000008 0x00002022 0x00000000 0x00000000 0x00000000

Cache descriptor Level 1 I 64 KB 1 thread(s)
Cache descriptor Level 1 D 64 KB 1 thread(s)
Cache descriptor Level 2 U 512 KB 1 thread(s)

MSR 0x0000001B edx = 0x00000000 eax = 0xFEE00900
MSR 0xC0010015 edx = 0x00000000 eax = 0x00010008


Chipset
------------------------------------------------------------------------------

Northbridge NVIDIA nForce2 Ultra 400 rev. C1
Southbridge NVIDIA nForce2 MCP-T rev. A4
Graphic Interface AGP
AGP Revision 3.0
AGP Transfer Rate 8x
AGP SBA supported, enabled
Memory Type DDR
Memory Size 1536 MBytes
Channels Dual
Memory Frequency 166.4 MHz (1:1)
CAS# 3.0
RAS# to CAS# 3
RAS# Precharge 3
Cycle Time (tRAS) 8


Memory SPD
------------------------------------------------------------------------------

DIMM #1

General
Memory type DDR
Manufacturer (ID) Nanya Technology (7F7F7F0B00000000)
Size 256 MBytes
Max bandwidth PC3200 (200 MHz)
Part number M2U25664DS88B3G-5T
Manufacturing date Week 45/Year 03

Attributes
Number of banks 1
Data width 64 bits
Correction None
Registered no
Buffered no
Nominal Voltage 2.50 Volts
EPP no
XMP no

Timings table
Frequency (MHz) 133 166 200
CAS# 2.0 2.5 3.0
RAS# to CAS# delay 2 3 3
RAS# Precharge 2 3 3
TRAS 6 7 8


DIMM #2

General
Memory type DDR
Manufacturer (ID) (0000000000000000)
Size 1024 MBytes
Max bandwidth PC3200 (200 MHz)
Part number

Attributes
Number of banks 2
Data width 64 bits
Correction None
Registered no
Buffered no
Nominal Voltage 2.50 Volts
EPP no
XMP no

Timings table
Frequency (MHz) 166 200
CAS# 2.5 3.0
RAS# to CAS# delay 3 3
RAS# Precharge 3 3
TRAS 7 8


DIMM #3

General
Memory type DDR
Manufacturer (ID) Nanya Technology (7F7F7F0B00000000)
Size 256 MBytes
Max bandwidth PC3200 (200 MHz)
Part number M2U25664DS88B3G-5T
Serial number FFFFFFFF