Dedicated Server --> HLTV

Regarde ici.

Tuto HLTV

Bah en faite c'est via se site que j'ai connu Dedicated Server et j'ai tout suivi a la lettre et le seul truc c'est que mon serveur a un mot de pass! Apres ca j'ai chercher comment faire quand y a un mot de pass. J'ai trouver mais voila ce qu'il me marque:

Console initialized.
FileSystem initialized.
Network initialized.
Master module initialized.
Server module initialized.
World module initialized.
Demo client initialized.
Executing file hltv.cfg.
hltv.cfg loaded.
Proxy module initialized.
Type 'help' for a list of commands.
No masters parsed from Steam
Using default master
serverpassword od
connect 213.251.144.12:27045
Challenging 213.251.144.12:27045 (1/3)
Challenging 213.251.144.12:27045 (1/3)
Challenging 213.251.144.12:27045 (1/3)
WARNING! Server::Challenge: Timeout after 3 retries
stop

Voila c'est tout ce qu'il y a d'ecrit dans le genre de ms-dos.

Puis on ma dit de modifier le fichier hltv.cfg et c'est ce que j'ai fais. Donc ca donne ca:

// HLTV Proxy configuration file

// HLTV proxy runs this file on start up
// This file should only be edited if you want to broadcast a game

// set HLTV proxy name as shown in score board
name "HLTV Odyssee"

// set HLTV name, how it should appear in game server browsers
// hostname "HLTV by raven2k"

// set offline info text clients will see as reject reason if HLTV isn't broadcasting yet
offlinetext "Desole, le jeu est arête, reesayez plus tard!"

// delays broadcasting for 30 seconds
delay 90

// allow 3.5 KByte/sec as client rate. This is good a value
// for internet broadcasts. On LAN you may set this value to 10000
maxrate 3500

// log HLTV console in proxy.log
// logfile 1

// local chatting for HLTV spectators enabled
chatmode 1

// if game server is password protected, enable this line
// serverpassword "od"

// proxy's adim password for rcon, commentator etc.
// adminpassword "od"

// show message for 5 seconds each 60 seconds in center of X axis (-1) and
// above help text bar (0.85). Color given as hexadecimal RGBA .
loopcmd 1 60 localmsg "You're watching HLTV. Visit www.valvesoftware.com" 5 -1 0.85 FFA000FF

// hltv.tga will be shown instead of the default HLTV logo in spectator GUI
// bannerfile "hltv.tga"

// these commands will be executed on connecting spectator client and may be used
// to adjust settings for HLTV (for example voice parameters)
signoncommands "voice_scale 2; voice_overdrive 16; volume 0.5; echo Voice adjusted for HLTV"


echo hltv.cfg loaded.


Voila c'est tout ce que je peux vous donnez comme info!

Merci d'avance