Tom's Guide > Forum > Accès Internet & Réseaux > partage adsl : bizarre !

partage adsl : bizarre !

Forum Accès Internet & Réseaux : partage adsl : bizarre !

TomsGuide.com : 800 000 inscrits répondent à toutes vos questions high-tech et informatique. Pour obtenir de l'aide, inscrivez-vous gratuitement !
Mot :    Pseudo :           
 

Salut tout le monde,

Je suis sur aol (adsl 512) et je voulais faire une dmz pour pouvoir acceder a distance a un pc de mon réseau. J'ai acheté un routeur (netgear rp 614) et un modem ethernet (alcatel speed touch home) mais avec aol, apparament, c'est pas possible. Le problème, c'est que j'ai quand meme voulu essayé, donc j'ai mis le routeur et le modem, réinstallé aol, et j'ai pu me connecter avec tcp/ip et non avec modem. Donc en gros, j'ai pu me connecter avec le routeur, mais le pc a planté et maintenant impossible de se reconnecter avec le routeur. A quoi c'est du ? Sinon, comment je peux faire pour faire un accès a distance sans routeur ?
Merci de vos réponses et de votre aide.

Liens sponsorisés
Inscrivez-vous ou connectez-vous pour masquer ceci.

Ben esaye en supprimant AOL et ton routeur de ton PC (tu supprimes le routeur de gestionnaire de périphériques).

Sinon ce que tu veux c'est avoir le net par TCP/IP sans ton routeur?

Répondre à bosco@idn

non, pas spécialement avoir tcp/ip sans le routeur parce qu'a mon avis, c'est pas possible. Je voudrais en faite pouvoir accéder a mon pc de l'exterieur. et le routeur n'est pas dans le gestionnaire de périphériques (bizarre) mais je peux y acceder par http://192.168.0.1 pour le configurer.
(en tout cas, merci pour ta réponse)

Répondre à GC60240

J'ai ca comme aide, mais j'y comprend pas grand chose (moi et l'anglais ... mais j'y travaille) si quelqu'un pouvait m'aider.
Merci d'avance, voila le document :

Help
The RP614 Settings pages allow you to configure, upgrade and check the status of your NETGEAR Cable/DSL Router.

Click an item in the leftmost column. The current settings or information for that area appear in the center column.

Helpful information related to the selected Settings page appears in this column. If you are using Internet Explorer, you may click an item in the center column to jump directly to the related help section; otherwise, scroll down until you reach it.


--------------------------------------------------------------------------------


Basic Settings Help

Note: If you are setting up the router for the first time, the default settings may work for you with no changes.

Does Your Internet Connection Require A Login?

Select this option based on the type of account you have with your ISP. If you need to enter login information every time you connect to the Internet or you have a PPPoE account with your ISP, select Yes. Otherwise, select No.

Note: If you have installed PPP software such as WinPoET (from Earthlink), Enternet (from PacBell) or AOL Broadband software, then you have PPPoE. Select Yes.

Internet Service Provider

Select your ISP if it is listed in the pull down menu, otherwise select Other.

AOL Broadband DSL or Cable

If AOL Cable or AOL DSL is selected the router will automatically be configured with the required information for an AOL Broadband Connection. For Internet Access you must use AOL 7.0 or higher on each PC connecting to the router, otherwise you will not be able to surf the web.

Note: Please note that applications that utilize "L2TP tunneling", such as AOL, will bypass the firewall feature included with this router. For additional home network security it is recommended that a PC-based firewall software application be installed.

Connecting to the Internet:

To connect to AOL and the Internet you simply sign-on to the AOL Service normally, using AOL 7.0 or above. The only change needed is the Select Location: setting at the sign-on screen, which must be set as follows:

AOL DSL users should select Home Network for their location.
AOL Cable users should select Home - Cable for their location.

If the Home Network or Home - Cable option does not show up in the pull down box then you will need to add the location. Please refer to the Start Here Guide AOL has provided in your NETGEAR router box for how to setup the location correctly. If the documents are not available, then please follow the instructions below:

AOL DSL Users

If you are able to sign-on to AOL:

1. Sign-on to AOL
2. Go to Keyword: Home Network Setup
3. Follow the instructions on your screen
4. Sign-off of AOL
5. Select Home Network as your location on the sign-on screen

AOL Cable Users

1. Select Home - Cable as your location on the sign-on screen

Note: If you able to sign on to AOL but are unable to reach any website ("Address Not Found" ), make sure you have configured your sign on location to connect using Home Network. Please refer to the AOL Start Here Guide for detailed instructions.

Login

This is usually the name that you use in your e-mail address. For example, if your main mail account is JerAB@ISP.com, then put JerAB in this box.

Some ISPs (like Mindspring and Earthlink) require that you use your full e-mail address when you log in. If your ISP requires your full e-mail address, then type it in the Login box.

AOL Broadband users do not need to change these settings on the router - they are automatically entered by NETGEAR.

Password

(Not available if you don't need to log in.)

Type the password that you use to log in to your ISP.

AOL Broadband users do not need to change these settings on the router - they are automatically entered by NETGEAR.

Service Name

For most users, you may leave this box blank.

If you have an Account Name given to you by your ISP, type it in this box. (For example, some Earthlink Accounts may require a service name of @earthlink.net.)

Idle Timeout

(Not available if you don't need to log in.)

This is the amount of time (in minutes) of inactivity that the router allows before disconnecting you from the server. The suggested default value is 5.

DNS Address

The DNS server is used to look up site addresses based on their names.

If your ISP gave you one or two DNS addresses, select Use These DNS Servers and type the primary and secondary addresses.

Otherwise, select Get Automatically From ISP.

Note: If you get 'Address not found' errors when you go to a Web site, it is likely that your DNS servers aren't set up properly. You should contact your ISP to get DNS server addresses.


My IP Address

Used for PPTP Login only.

Server IP Address

Used for PPTP Login only.

Connection Name (ID)

Used for PPTP Login only.

Apply, Cancel and Test

Click Apply when you finish changing the settings.

Click Cancel to return to the original settings.

Click Test to connect to the NETGEAR Web site. If you connect successfully, your settings work and you may click Logout to exit these pages and... enjoy surfing the 'net!

If you don't connect successfully,

Go through the settings and make sure you've selected the correct options and typed everything correctly.
Contact your ISP to verify the configuration information.
Read the Troubleshooting section in the RP614 Installation Guide.
On the RP614 Resource CD, read the Troubleshooting Guide or the Troubleshooting section in the Reference Manual.
Contact NETGEAR Technical Support.

Répondre à GC60240

je vais te le traduire mais attends quelques jours

Répondre à bosco@idn

Merci beaucoup, c'est top !!!

Répondre à GC60240

quel domage d'avoir acheté un routeur alors que ce brave speed touch home peut devenir un excellent st510 en changeant le firmware.

Répondre à grongruik

le probleme moi je pense, c'est que le partage de connexion est interdit avec aol.

Répondre à nicrib

je sais que l'alcatel peut passer en pro sans trop de problème, mais je prefere avoir les deux séparé.

Répondre à GC60240

non tu peux partager ta connexion avec AOL.
je capte pas le truc du modem Alcatel qui passe en pro?

Edit : ton modem ethernet, c'est toi qui l'a acheté ou c'est AOL qui te la passé?

Répondre à bosco@idn

Merci Bosco pour la traduc, mais j'ai pu me le faire traduire, c'est sympa de ta part !

Est ce que vous comprenez comme moi ? (en gros, partage possible !) :

ICI

Le modem ethernet, c'est moi qui l'ai acheté (aol m'a passé un thomson usb speed touch 330)
Et avec l'alcatel, le pro et le home sont identique sauf le firmware, ce qui permet de passer le home (modem seul) en pro (modem/routeur):
transformation home en pro

Sinon, j'ai deja le partage de connexion sans routeur, mais il faut que je puisse accéder a un poste du réseau de l'exterieur (maintenance a distance) donc si vous avez une solution, je suis preneur. (meme sans routeur).

Répondre à GC60240

si tu peux mais c'est pas sur que sa marche

Répondre à bosco@idn

Et bien, j'ai réussi a partager ma connexion aol avec un routeur (sans logiciel proxy ou quoi), le comment j'ai fais, je me le demande encore, j'ai pris mon autre pc avec win2000 server et sur le routeur mis mon login et mot de passe aol, le tout sous le protocole pppoe. Ca a fonctionné tout de suite, après la configuration des postes restants (3 xp pro ou la j'arrivais a rien sur aucun des 3) il faut créer une connexion de petite entreprise et selectionner "autre" comme type de connexion, ensuite "connexion via un concentrateur", et ca fonctionne (je suis sous ip dynamique pour le moment)
Donc en gros, aol + routeur = possible et ca fonctionne.

Répondre à GC60240
Tom's Guide > Forum > Accès Internet & Réseaux > partage adsl : bizarre !
Aller à :

Il y a 2127 utilisateurs connus et inconnus. Pour voir la liste des connectés connus, cliquez ici.

Attention

Vous allez répondre sur un sujet resté inactif pendant plus de 6 mois.
Assurez-vous d'apporter des éléments nouveaux à la discussion avant de poursuivre.

Répondre Annuler
Liens